The VM0008 Control Processor Module - Controls the VF200 and is usually required. VMOOO8

The VM0002 Two Channel NTSC/PAL Module - Monitors two channels of NTSC/PAL video. Parameters monitored include: 1. Video is sampled and pictures are output to the VTECS Enterprise Monitoring Software. 2. Pictures are available as 66x49 small thumbnails, 102x81 large thumbnails, or full field. 3. Missing Sync. 4. Pedestal Level. Video average program level. 5. Frozen signals. 6. VBI data such as closed captioning.VM0002

The VM0004 SDI Video Module - Monitors one channel of SDI video. Parameters monitored include: 1. Video is sampled and pictures are output to the VTECS Enterprise Monitoring Software. 2. Pictures are available as 66x49 small thumbnails, 102x81 large thumbnails, or full field. 3. Picture unlocked - bad or missing clock. 4. Pedestal level. 5. Video average program level. This can be set to various thresholds such as black. 6. Frozen signals. 7. VBI data such as closed captioning. 8. Monitors four audio signals out of one group. Group is configurable.VM0004

The VM0001 Four Channel Analog Audio Module - Monitors four channels of analog audio. Parameters monitored include: 1. Audio is sampled and levels are output to the VTECS Enterprise Monitoring Software. 2. Average audio level is available. 3. Peak audio level is available. 4. Major feature is being able to detect a certain level such as silence or excessive loudness for certain lengths of time.VM0001

The VM0003 Two Input AES/EBU Audio Module - Monitors four channels of digital audio. Parameters monitored include: 1. Audio is sampled and levels are output to the VTECS Enterprise Monitoring Software. 2. Input clock detect and quality. 3. Average audio level is available. 4. Peak audio level is available. 5. Major feature is being able to detect a certain level such as silence or excessive loudness for certains lengths of time. 6. The module can be jumper configured for balanced or unbalanced audio. VM0003

The VM0009 DTMF Tone Module - Monitors four channels of analog audio for DTMF tones. Parameters monitored include: 1. DTMF tones can be received. 2. DTMF tones can be generated.VM0009

The VM0010 16 Relay GPI Output Module - Has 16 GPI outputs.VM0010

The VM0006 16 Input GPI Module - Has 16 GPI inputs. Each input can be jumper configured to be TTL or opto-isolated.VM0006

The VM0011 32 Input/Output GPIO Module - Each I/O pin can be dynamically configured by the software to be a TTL input or TTL output.VM0011

The VM0007 2 x 2 Passive Transfer Switch Module - This is a two-by-two relay based signal router. Features include: 1. One 2x2 video passive switch. 2. Four 2x2 balanced audio passive switches. 3. Control can be from the VM0008 or from back panel GPI inputs. 4. Power presence back panel GPI output. 5. Switch state back panel GPI output.VM0007

The VM0012 HD 2x2 Passive Transfer Switch Module - This module is a 2 input, 2 output passive transfer switch. It uses latching 8GHz precision relays to allow bypassing HD 1.4GHz signals. Each input is exclusively available at each output to permit the secondary signal to be directly monitored as well as the primary. Features include: 2 BNC 1.4 GHz inputs, 2 BNC 1.4GHz outputs, passive latching relays, 8GHz bandwidth, >15dB return loss, direct GPI control on the module, Ethernet & SNMP control and monitoring through the VF200 control system.VM0012

The VM0013 Dual Input AES/EBU Monitor with Transfer Switch - This module offers the combined features of the VM0003 module and the VM0007 module in a single module. Features include: Input clock presence/quality detect, average audio level monitor, peak audio monitor, programmable detection levels and durations, passive relay transfer function swapping both inputs to both outputs, on board GPI switch command inputs and status output, Ethernet & SNMP control and monitoring through the VF200 control system.VM0013

The VM0014 RS-422 2x1 Transfer Switch - This module provides latching relay based passive 2x1 switchover for RS422 control signals. It can be used to select one of two inputs to one output, or it can be used to send one input to one of two outputs. The data lines can be jumpered to adjust for non-standard usage of RX/TX lines 2, 3, 7 and 8. In addition the RX side can be jumpered to connect to both inputs. Features include: 2 x 1 RS-422 switching or 1 x 2 switching, passive latching relays operation, DB-9 connectors, flexible jumpering of data lines to fix non-standard data line implementations, RX "always connected" jumper option, Direct GPI control and status on module rear connector, Ethernet & SNMP control through the VF200 control system. VM0014